CFFWL - ADH AEROSOL ADHESIVE

  • MSDS: CFFWL
  • Manufacturer: STATE CHEMICAL MFG CO THE
  • Product Name: ADH AEROSOL ADHESIVE
  • National Stock Number: 6830-00F053800
Product Identification

Product ID:ADH AEROSOL ADHESIVE
MSDS Date:10/01/1992
FSC:6830
NIIN:00F053800
MSDS Number: CFFWL

Responsible Party
STATE CHEMICAL MFG CO, THE
3100 HAMILTON AVE
CLEVELAND, OH 44114-3783
US

Emergency Phone: 216-861-7114

Info Phone: 216-861-7114

Cage: 53798

Contractor
STATE CHEMICAL MANUFACTURING CO.
CLEVELAND, OH 44114-3701 US

Telephone: 216-861-7114

Cage: 53798

Ingredients

PROPANE (DIMETHYLMETHANE) *97-1*

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: <25%

OSHA PEL 1000 PPM

ACGIH TLV: SIMPLE ASPHYXIANT


HEXANE, N-HEXANE *97-1*

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: <65%

OSHA PEL 1800 MG/CUM

ACGIH TLV: 176 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IN CONFINED AREAS, VAPORS MAY BE
ANESTHETIC. PRODUCT MAY BE IRRITATING TO SKIN/NOSE. OVEREXPOSURE
MAY BE HARMFUL/FATAL. MAY CAUSE LIVER & KIDNEY DANMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, NAUSEA, MENTAL
CONFUSION, DEPRESSION, FATIGUE, LOSS OF APPETITE, NAUSEA, VOMITING,
COUGH, LOSS OF SENSE OF BALANCE & VISUAL DISTURBANCES.

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/COOL WATER FOR 15 MINS. DON'T WEAR CONTACT LENSES WHILE USING
THIS PRODUCT. SKIN: WASH THROUGHLY W/SOAP & WATER. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TOC
Flash Point:<20F PROPELLANT
Extinguishing Media:CO2, DRY CHEMICAL/FOAM
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE. KEEP CONTAINERS
COOL. USE SHIELDING TO PROTECT PERSONNEL FROM VENTING,
RUPTURING/BURSTING CANS.
Unusual Fire/Explosion Hazard:DON'T SPRAY NEAR OPEN FLAME. EXPOSURE TO
TEMP >120F MAY CUASE CANS TO VENT, RUPTURE/BURST.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF FLAME, SPARK/HEAT. VENTILATE
AREA. ABSORB ON STATE OIL ABSORBENT. WASH RESIDUE W/PLENTY OF
WATER.

Handling

Handling and Storage Precautions:CONTENTS UNDER PRESSURE. DON'T
PUNCTURE, INCINERATE/STORE CANS IN DIRECT SUNLIGHT, NEAR OPEN
FLAMES/SPARKS/WHERE TEMPERATURES MAY EXCEED 120F.
Other Precautions:READ & FOLLOW ALL LABEL DIRECTIONS & PRECAUTIONS
BEFORE USING THE PRODUCT. PRODUCTS ARE INTENDED FOR INDUSTRIAL &
INSTITUTIONAL USE ONLY. NOT FOR HOUSEHOLD USE/RESALE. KEEP OUT OF
REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:IF TLV IS EXCEEDED, WEAR NIOSH APPROVED
RESPIRATOR W/ORGANIC VAPOR CARTRIDGES.
Ventilation:MECHANICAL VENTILATION IS REQUIRED. DON'T USE IN A CONFINED
SPACE.
Protective Gloves:VITON
Eye Protection:SAFETY GLASSES
Other Protective Equipment:CLEAN WATER SOURCE IN CASE OF EYE CONTACT.
Supplemental Safety and Health
EYE PROTECTION & PROTECTIVE GLOVES ARE RECOMMENDED ANYTIME YOU WORK
W/ANY CONCENTRATED INDUSTRIAL STRENGTH PRODUCTS. BOILING POINT IS
FOR PROPELLANT.

Chemical Properties

Boiling Pt:B.P. Text:<0F (SUPP)
Appearance and Odor:AN AEROSOL ADHESIVE W/A SOLVENT LIKE ODOR
Percent Volatiles by Volume:80/WT

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, CAUSTICS, CHEMICALLY ACTIVE LIGHT METALS, PLASTICS;
POLYSTYRENE.
Stability Condition to Avoid:TEMPS >120F, FLAME, SPARKS/HEAT
Hazardous Decomposition Products:BY BURNING: CO, CO2

Disposal

Waste Disposal Methods:DON'T INCINERATE CANS. GIVE CANS TO A DISPOSAL
SERVICE EQUIPPED TO PROPERLY DISPOSE OF PRESSURIZED CANS. DISPOSE
OF IAW/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.